We're closed from 19th Dec until 5th Jan. Any orders placed in-between will be processed if items are available from stock.

Buy Now, Pay Later

UK Leader In Performance Tuning & Parts

Product Search

Account

finance availablebuy now pay later
advice line01244 880546
worldwideshipping available
secure paymentsafe transactions

ECUTeK RaceROM Remap And Mapping Session for Toyota GR86 / Subaru Gen 2 BRZ FA24 22-on

SKU: GR86REMAP

£400.00 (£333.33 + VAT)

Available

Brand:

Spread the cost of your purchase into 3 equal Instalments.

Product Description

ECUTeK remap and mapping for your Toyota GR86 or Subaru Gen 2 BRZ from Tuning Developments.

Toyota GR-86 / Subaru Gen 2 BRZ

 

Supported Models

Subaru BRZ
All models from MY 2022 onwards
Toyota GR-86
All models from MY 2022 onwards

  • Supported by PhoneFlash
    1. All models can have their Engine ECU programmed via PhoneFlash.

RaceROM Custom Features

RaceROM Custom features are written into our tuning software to give you unique features.

  • Four-way Mode Switching
    1. Swap between four different modes using either the cruise control buttons or ECU Connect on your mobile device. Which mode you are in will be indicated on the rev counter.
  • Adjustable Launch Control
    1. Live adjustment of the launch RPM using the cruise-control switchgear or the ECU Connect app. It can be enabled in any map switch mode.
  • Speed Density Option
    1. Run a speed density tune if you are running forced induction conversion or want to get rid of your MAF sensor.
  • Adjustable Traction Control
    1. Once this has been set up in your tune, aggressiveness can be adjusted in each of the 4 modes using the ECU Connect app on your phone.
  • Flat-foot Shift
    1. Make full-throttle gearshifts by reducing engine torque and controlling the engine speed during the gear change.
  • Auto Blip
    1. Applies a short burst of throttle when downshifting under braking to provide a smooth entry into the next gear.
  • Self Adjusting FlexFuel
    1. No more worries about calculating the ethanol in the tank; our RaceROM self-adjusting flex-fuel does it all for you. Just fit a 0-5v Flex Fuel sensor, and off you go. Whatever Ethanol content in the tank, the tune will automatically adjust to give you optimal performance. Link up with ECU Connect to display the current Ethanol blend on a gauge in a dashboard.
  • Up to 8 CAN Outputs
    1. These outputs can be used with a suitable device to expand the ECU’s capabilities or integrate with a separate controller for systems such as boost control or pump and relay control.
  • Valet Mode
    1. This comprises a low power mode with reduced torque and vehicle speed giving you peace of mind when the car is in someone else’s hands. Set in a map switch mode using steering wheel controls or via the ECU Connect app.

 

 

The ECUTeK Package from Tuning Developments is the choice for your Toyota GR86 or Subaru Gen 2 BRZ.

Tuning Developments with the aid of the ECUTeK programming suite can customise your Toyota GR86 or Subaru Gen 2 BRZ, to make your driving experience more exciting at the weekend and easier and a pleasure for the daily commute. Whether your GR86 or BRZ is standard or modified, Tuning Developments can improve the drive of your GR86 or BRZ.

 

We at Tuning Developments understand that every car is slightly different. With this in mind, All of our files are custom written on YOUR GR86 or Gen 2 BRZ, to suit YOUR GR86 or BRZ. To do this the car is strapped to our state of the art Dyno Dynamics 450DS Rolling Road in our purpose built, temperature controlled dyno cell. This features over 15hp and 50,000cfm of extraction fans to ensure it is the perfect environment and conditions for tuning your car. We monitor multiple engine parameters along with high speed lambda to ensure your GR86 or BRZ is running at optimum performance. You will receive printouts afterwards showing the final performance figures. Each vehicle is then taken on the road for a data logging session and final road test to make sure all is correct.

 

Throttle response is fine tuned along with a fully refined exhaust and intake cam timing maps for a punchier, stronger low end pull with a improved torque curve although most of the FA24 engine gains are found at the peak power area on a standard car, We strongly recommend our exhaust manifolds / headers which fully remove the Torque Dip. Power is increased throughout the rev range and really makes the GR86 and BRZ come alive with healthy gains through the mid range and peak power areas. RPM limit is also increased on certain setups through the ECUTeK RaceROM, allowing full flexibility to suit all your needs and requirements.

 

Map Configurations:

Map 1 : Maximum Power & Torque with Throttle Response Fine Tuned
Map 2 : As Map 1 With Additions Of Launch Control & Auto Blip On Downshift
Map 3 : As Map 2 With Addition Of Flat Foot Shifting
Map 4 : Low Octane Grade Safe Map, For When Super Unleaded Is Not Available

These configurations can be tailored to suit your requirements, please contact us for further details.

On top of all this, fuel economy is also improved when cruising with us seeing a healthy increase in miles per gallon on our own Tuning Developments GR86.

When having your car mapped with ECUTeK for the first time, there is a license fee payable to unlock the ECU to you, the customer, for life. This is charged at £225.00 + VAT and is payable once and once only. We offer discounts for remaps booked with ECUTeK licenses included. Please contact for details.

If you have any questions, or queries with this service, please feel free to contact us at Tuning Developments, via email or telephone on 01244 880546.

Additional Info

Additional information

Make

Toyota, Subaru

Model

BRZ, GR86

Complete the form and a member of our team will be in touch with you.